Browse Spare Parts

Matched pair of garter springs for the 76.2mm cutting headset. These hold the head segments under even tension, so replace as a pair rather than singly.

Matched pair of garter springs for the 152.4mm cutting headset. These hold the head segments under even tension, so replace as a pair rather than singly.

Fixed top knife guard for the TC10 manual core cutter. A safety critical part, so replace immediately if it is cracked, bent or missing.

Pivoting bottom knife guard for the TC10 manual core cutter. Moves with the cutting arm to keep the knife shrouded through the cut.

Return spring for the cutting arm. Brings the arm back to its rest position after each cut, so a tired or broken spring shows up as a slow or incomplete return.

Spring clip for the core stop. Holds the stop at the set position so repeat cuts come out to the same length.

Replacement 1.5mm thick cutting knife. The thinner of the two options, suited to lighter cores where a finer cut is wanted. Quantity discounts apply.

The Parkland TC10 Series R is a compact manual machine that is practical, efficient and cost effective. It produces an accurate, clean, quality cut with quick and easy change-over for multiple core diameters and wall thickness. Cutting is achieved by using a free running crush cut knife principle.