Browse Spare Parts

Standard cutting cone for 76.2mm internal diameter cores on the TC25. Locates the core on the spindle and supports it through the cut. Note this is a different part to the cone used on the TC35 and TC45.

Standard cutting cone for 152.4mm internal diameter cores on the TC45. Locates the core on the spindle and supports it through the cut.

Hexagon drive bush supplied with pins, 11 A/F. Note the longer lead time on this size compared with the 16 and 19 A/F.

Hexagon drive bush supplied with pins, 16 A/F. Drives the core from the mandrel through the cut.

Hexagon drive bush supplied with pins, 19 A/F. Drives the core from the mandrel through the cut.

Hexagon drive bush supplied with pins, 19 A/F, for the TC25. Note this is a different part to the hexagon drive bushes listed for the TC35.

Hexagon drive bush supplied without pins, 11 A/F. Note the longer lead time on this size compared with the larger sizes.

Hexagon drive bush supplied without pins, 16 A/F. Drives the core from the mandrel through the cut.

Hexagon drive bush supplied without pins, 19 A/F, for cores from 68.0mm to 152.4mm internal diameter. Check your core size, as a second 19 A/F bush covers the smaller range.

Hexagon drive bush supplied without pins, 19 A/F, for cores from 58.0mm to 68.0mm internal diameter. Check your core size, as a second 19 A/F bush covers the larger range.