Browse Spare Parts

Ø75 core support rollers, supplied as a pair. Support the core along its length to keep the cut square.

Standard cutting cone for 76.2mm internal diameter cores on the TC25. Locates the core on the spindle and supports it through the cut. Note this is a different part to the cone used on the TC35 and TC45.

Hexagon drive bush supplied with pins, 19 A/F, for the TC25. Note this is a different part to the hexagon drive bushes listed for the TC35.

Spindle bush for the 19 A/F mandrel on the TC25, for use with cutting discs. Note this is a different part to the TC35 spindle bushes.

Packing piece for the TC25, Ø18.9 x Ø16.0 x 3.0, supplied as a pair. Used to space the assembly correctly on the mandrel. Note this is a different part to the TC35 packing discs.

Replacement 1.5mm thick cutting knife. The thinner of the two options, suited to lighter cores where a finer cut is wanted. Quantity discounts apply.

Replacement 2.0mm thick cutting knife. The heavier option, suited to denser cores and higher throughput. Quantity discounts apply.

Replacement cutting discs for 76.2mm internal diameter cores. A consumable item, so worth holding a few in stock. Quantity discounts apply.

Replacement cutting discs for 152.4mm internal diameter cores. A consumable item, so worth holding a few in stock. Quantity discounts apply.

The Parkland TC25 Series R is a semi-automatic machine that is ideal for customers looking for high quality, accurate finish with a minimum amount of operator input. An entry level automatic machine that has quick and easy settings for different core diameters and wall thicknesses, this is ideal for the medium volume user.