Browse Spare Parts

Housing for the knife bearing. Replace alongside the bearing where the housing bore has worn oval.

Stud for the knife bearing assembly. Replace with the bearing if the stud shows wear or scoring.

Hinge pin for the pivoting knife guard. Allows the guard to swing freely, so replace if the guard has become stiff or sloppy.

Locking pin for the knife guard. Holds the guard in its set position. A safety related part, so do not run the machine without it.

Pin for the knife depth stop. Sets and holds the cutting depth so repeat cuts stay consistent.

M10 clamping handle for the support cartridge. Replace if the thread has stripped or the handle has cracked.

M12 clamping handle for the knife depth stop. Replace if the thread has stripped or the handle has cracked.

Replacement 2.0mm thick cutting knife. The heavier option, suited to denser cores and higher throughput. Quantity discounts apply.

Replacement cutting discs for 76.2mm internal diameter cores. A consumable item, so worth holding a few in stock. Quantity discounts apply.

Complete cutting headset for 76.2mm internal diameter cores, supplied with cutting disc and core support collar fitted. A direct drop in replacement for the TC10 manual core cutter.